User's Manual
Table Of Contents
- 1 Introduction
- 2 Quick Guide to setting up S610S
- 3 Connecting an S610S Master Reader
- 3.1 Open the S610 reader case
- 3.2 S610S Master Reader 12V Power and Data connections
- 3.3 Extra settings required, made on the reader
- 3.4 Addressing an S610S master reader
- 3.5 S610S Connecting Master Reader Inputs
- 3.6 Monitoring Inputs for Cable Tampers
- 3.7 Using an external read head
- 3.8 S610S Lock and spare output relay connections
- 4 Connecting an S610S to an Exit Reader
- 5 Connecting an S610S to a DIU
- 6 AC2000 Devices Application tasks
- 7 Door Modes
- 8 Interlock
- 9 Other AC2000 software configurations
- 10 S610S onboard diagnostic mode
- 11 Appendix
S610S Manual - Hardware Installer Manual - Version 1.8
57
Inputs 4 Analogue – voltage supplied
Operational temperature range
Humidity
-20°C to +50°C (-4°F to 122°F)
Unlimited, also condensing. IP65.
Reader Power Backup battery 9V NmH rechargeable (Not Included)
RAM Memory Backup battery Rechargeable Lithium-Ion battery fitted on PCB
Other requirements AC2000 or webEntryII access control system
Emmisions: WARNING This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.