User's Manual
Table Of Contents
- 1 Introduction
- 2 Quick Guide to setting up S610S
- 3 Connecting an S610S Master Reader
- 3.1 Open the S610 reader case
- 3.2 S610S Master Reader 12V Power and Data connections
- 3.3 Extra settings required, made on the reader
- 3.4 Addressing an S610S master reader
- 3.5 S610S Connecting Master Reader Inputs
- 3.6 Monitoring Inputs for Cable Tampers
- 3.7 Using an external read head
- 3.8 S610S Lock and spare output relay connections
- 4 Connecting an S610S to an Exit Reader
- 5 Connecting an S610S to a DIU
- 6 AC2000 Devices Application tasks
- 7 Door Modes
- 8 Interlock
- 9 Other AC2000 software configurations
- 10 S610S onboard diagnostic mode
- 11 Appendix
S610S Manual - Hardware Installer Manual - Version 1.8
2
6.4 Access control using PIN Only .................................................................................. 26
6.5 Card, Cardswipe and PIN or PIN ONLY options ...................................................... 27
6.6 Extended Timezone configuration ............................................................................. 28
7 Door Modes 30
7.1 Door mode .................................................................................................................. 31
7.2 Verification 24, Verification 32 ................................................................................. 31
Desfire Verification ................................................................................................. 31
Encrypted verification – Mifare Finch .................................................................... 31
7.3 Passenger mode .......................................................................................................... 31
Interlocking Passenger mode (Lobby Mode) .......................................................... 32
7.4 Control Post mode ...................................................................................................... 32
7.5 PIR mode .................................................................................................................... 32
7.6 Passenger-staff exit mode ........................................................................................... 33
Air-Bridge with Passenger-Staff exit mode ............................................................ 33
Second Swipe Action configuration ........................................................................ 34
7.7 Trolley mode .............................................................................................................. 35
7.8 Turnstile Mode ........................................................................................................... 35
Selecting S610S Turnstile Mode ............................................................................. 35
Single S610S reader – Fail Secure/Fail Safe ........................................................... 35
Controlling power to a turnstile .............................................................................. 36
Wiring a bidirectional turnstile ............................................................................... 36
S610E/S610S Inputs and Outputs ........................................................................... 36
AC2000 – Configuring Turnstile Mode .................................................................. 38
7.9 Equipment Enable mode ............................................................................................ 39
Setting Timing controls on equipment .................................................................... 39
Functionality ........................................................................................................... 39
Automatic equipment disable feature ...................................................................... 40
Equipment Enable - Time settings .......................................................................... 40
Equipment Enable card usage outcome codes ........................................................ 40
Connection Diagram for Equipment mode ............................................................. 41
AC2000 software settings for equipment mode ...................................................... 41
Equipment Mode; Input configuration .................................................................... 41
Alarm Configuration ............................................................................................... 42
7.10 Multiple badge access ................................................................................................ 42
8 Interlock 43
8.1 Interlock in Door Mode .............................................................................................. 43
Configure the reader’s interlock input .................................................................... 43
Configure the reader’s interlock output .................................................................. 43
Configuring Interlock Input IP 3, or IPB (if DIU) .................................................. 43
8.2 Passenger mode interlock – Lobby Mode .................................................................. 44
Without a Valve Lobby Controller ......................................................................... 44
No access on interlock ............................................................................................ 44
With a Valve Lobby Controller ............................................................................... 44
9 Other AC2000 software configurations 45
9.1 To Edit or Add an input for AED alarm management ............................................... 45
S610E input table – No DIU ................................................................................... 45
S610E with DIU Input table .................................................................................... 45
9.2 Disabling an Input using AC2000 software ............................................................... 45
9.3 Input/output Mapping ................................................................................................. 46
Mapping an input to an output ................................................................................ 46
9.4 Configuring a spare Output Relay .............................................................................. 46
Connecting a Sounder. ............................................................................................ 47
9.5 Other AC2000 configuration options ......................................................................... 47