User's Manual
Table Of Contents
- 1 Introduction
- 2 Quick Guide to setting up S610S
- 3 Connecting an S610S Master Reader
- 3.1 Open the S610 reader case
- 3.2 S610S Master Reader 12V Power and Data connections
- 3.3 Extra settings required, made on the reader
- 3.4 Addressing an S610S master reader
- 3.5 S610S Connecting Master Reader Inputs
- 3.6 Monitoring Inputs for Cable Tampers
- 3.7 Using an external read head
- 3.8 S610S Lock and spare output relay connections
- 4 Connecting an S610S to an Exit Reader
- 5 Connecting an S610S to a DIU
- 6 AC2000 Devices Application tasks
- 7 Door Modes
- 8 Interlock
- 9 Other AC2000 software configurations
- 10 S610S onboard diagnostic mode
- 11 Appendix
Date
Revision
Number
Modifications
01/10/2007
1.0
S610S Document Release. AC2000 5.5
Current reader Firmware B1.00.39
02/12/2007
1.2
Extended Time Zone mode
01/03/2008
1.3
Document Review
05/11/2008 1.4 Interlock in Door mode and Smartcard key definitions
08/11/2009
1.5
New Passenger Exit mode & web tool firmware update
09/03/2010 1.6 Multi badge access
22/03/2010 1.7 High Security Environments
22/07/2014
S610S-IM-0047-1.8
Product code and warning changes
Published by: - Controlled Electronic Management Systems Limited
195 Airport Road West, Belfast Harbour
Northern Ireland, United Kingdom BT3 9ED
Tel: +44 (0)28 9045 6767
Fax: +44 (0)28 9045 4535
E-mail:
sales@cemsys.com
Website: www.cemsys.com
Copyright Controlled Electronic Management Systems Limited. All rights reserved. No part of this publication may be produced
without the written permission of Controlled Electronic Management Systems Limited.
The information in this publication is subject to change without notice
P:\TAD\CoreDocumentation\CEMCoreDeviceDocs\S600\S610S\S610S_IM-6-1.8.docx