User's Manual

InfoProx Entry Configuring the Door Control Unit
5. Configuring the Door Control Unit
When connecting power to the InfoProx Entry door control unit for the first time, the unit
initializes a default configuration. Once the unit is powered, the LCD screen displays the
idle prompt:
InfoENTRY 16:30
Present Card
16:30 is the time presented in military format. Section 3
describes how to configure your local time.
Access to all menus is through the Administration menu. The administration menu
provides the operational features of InfoProx Entry and control of the following:
· Administrator password insertion (only at installation)
· Addition or deletion of access cards
· Searches for access cards
· Operational configuration of the reader (time zones and door modes
inputs)
· Diagnostic testing of the reader
· Administrator password change
· Backing-up the reader database to a PC
· Displaying transaction information (card/alarm information)
Details about configuring the unit and how to use the menu options are explained below.
First Time Access to the Administration Menu
When the reader is in stand-by mode (powered-up, waiting for a transaction), the
screen displays the idle prompt:
InfoENTRY 16:30
Present Card
Accessing the Administration menu
Press # 0 Ù at the keypad. The menu of options displays on two screens.
0-Del, 1-Add
2-Find, 3-Config
4-Diag, 5-Pword
6-Backup
Software House 23