User's Manual
Table Of Contents
- Important Safety Information
- Introduction
- EtherProx Entry Installation
- Configuring the EtherProx Entry
- Administering the EtherProx Entry
- Diagnostics
- Glossary
Diagnostics EtherProx Entry
When you reach the end of a submenu, the following message appears:
Back
Note If you do not press a key for 10 seconds, EtherProx will
move back through the menu tree and return to the Main
Menu. Although there is one exception. The Input Test
menu will hold for 60 seconds, and then EtherProx will
move back through the menu tree and return to the Main
Menu.
4. To exit Diagnostic mode, press # until you see the following menu item
on the LCD display:
<* 0^ 0>
5. Press 0.
Understanding the Diagnostic Menu System
The following table contains the menu items in the EtherProx Diagnostic Menu System.
The Main Menu contains four menu items: Information, Test, Configure, and Exit. These
menu items contain submenu items and options, which appear in the Submenu and
Option columns. You can run diagnostics on any of the options. In the Description column,
there are descriptions of the options.
Page 44 Software House