User's Manual

EtherProx Entry Diagnostics
6. Diagnostics
The EtherProx Entry reader provides a set of diagnostic tools for testing the EtherProx
software and hardware. The EtherProx Diagnostic Menu System provides menus on how
to work with diagnostics.
Note Only installation and maintenance personnel should run diagnostics on
EtherProx Entry.
Running Diagnostics
You can run the EtherProx diagnostic tools using the reader keypad. As you run the
diagnostics, you will see messages appear on the LCD display.
To run diagnostics
1. To enter Diagnostic mode, at the reader keypad, press ÙÙÙ0000.
The following message appears on the LCD display:
<* 0^ 0>
2. Press # to continue.
The following message appears on the LCD display:
EtherProx Diags
Information
For details on the diagnostic menus, see section 5.2, “Understanding the
Diagnostic Menu System.”
Note If you do not press a key for 10 seconds, EtherProx exits
Diagnostic Mode.
3. To navigate through the diagnostic menus:
n Press # to move to the next menu item.
n Press 0 to select a menu item.
n Press Ù to move to the previous menus and options.
Note When you enter an IP address, type Ù to represent
each period in the IP address. You should end the IP
address with Ù. You clear typing errors by pressing # to
erase each character you want to delete.
Software House Page 43