User's Manual
Table Of Contents
- Important Safety Information
- Introduction
- EtherProx Entry Installation
- Configuring the EtherProx Entry
- Administering the EtherProx Entry
- Diagnostics
- Glossary
EtherProx Entry Administering EtherProx Entry
Configure Timed Events
The Timed Events page lets you select events that you want to occur during
specified time intervals, as shown in Figure 9.
Figure 9: Timed Events Page
The following table lists the Configure Timed Events settings with their
descriptions.
CONFIGURE TIMED EVENTS
SETTING
DESCRIPTION
Door Override Unlocks the door and allows unrestricted
access. The parameters are the same as
the groups in time clearances (See section
4.3, "Time Clearances").
Card Only, No PIN If you use PINs with your cards, you can
specify a time clearance group during which
cardholders do not need to enter the PIN.
For example, at a busy time of day.
Global PIN Only Permits access with a global PIN that you
specify in the Global PIN code box. When
you enable this setting, cards are not
required because anyone who knows the
global PIN code can gain access.
Global PIN Code Lets you specify or change the global PIN.
The global PIN must contain four digits.
Software House Page 37