User's Manual
Table Of Contents
- Important Safety Information
- Introduction
- EtherProx Entry Installation
- Configuring the EtherProx Entry
- Administering the EtherProx Entry
- Diagnostics
- Glossary
Configuring EtherProx Entry EtherProx Entry
Setting up the Initial Door Configuration
To configure a door
1. On the Main Menu, click Administer EtherProx>EtherProx
Configuration>Configure Door.
The Door Configuration page appears.
2. In the Door Times section, specify the seconds for the Unlock time
option.
3. Change the settings for any other Door options.
4. Click Update.
Page 24 Software House