Instruction manual

Kit Contents

Powerhead Unit (Fig. 02)

1 x Controll-A-Door

P Diamond powerhead

1 x Transmitter pack

(Pack includes two keyring transmitters and batteries)

1 x Wall mount transmitter with battery

2 x Door attachment arms

1 x Accessory and hardware pack

1 x Installation Manual

Single Piece C-Rail with Pre-Assembled Chain

(Fig. 03)

NOTE: Chain in one piece rail has been tensioned by the

factory. Adjust the tension of the chain to suit.

IMPORTANT NOTE: If a modiﬁcation to the length of the

track is required, the adjustment must be made from the

powerhead end only.

Single Piece C-Rail with

Pre-Assembled Timing Belt (Fig. 04)

Note: timing belt in one piece rail has been tensioned by

the factory. Do not adjust the tension of the timing belt.

IMPORTANT NOTE: If modiﬁcation to the track length is

required, adjustment must be made only from powerhead

end.

Fig. 02

Fig. 04

Fig. 03

PLUS

Controll-A-Door

Diamond Instruction Manual8