Instruction manual

Fig. 42

REPLACE BATTERY WITH CR2032 ONLY

How To Use Your Opener

Removing the Battery From the Transmitter

(Battery Type: 3V Lithium Battery CR2032).

Use a non-metallic object (e.g. pen) to remove the battery.

(Fig. 42)

Inbuilt Locking Facility

DO NOT lock your door when your opener is engaged as it

has inbuilt locking facility. With the opener engaged your

door will be locked whether the power is on or off.

Manual Door Operation

CAUTION: when operating the manual release

while the door is open. The door may fall

rapidly due to weak or broken springs, or due

to being improperly balanced. (AS3350)

CAUTION! Do not disengage the opener to

manual operation with children/persons or

any objects including motor vehicles within

the doorway.

To disengage the opener from the door (preferably with

the door in the closed position), pull down on the string

handle on an angle towards the door. This will allow you to

manually open or close the door. To re-engage the opener

pull the string handle away from the door.

WARNING! When the opener is manually

disengaged, the door is no longer locked. To

lock the door manually, re-engage the opener

after the door is closed.

Power Failure

When there is a power failure, the opener will be unable to

automatically open or close your garage door. To use your

door whilst there is no power you will need to disengage the

opener and use the door manually – see Manual Operation

above.

Diamond PD Power Drive : Instruction Manual

25Controll-A-Door

Diamond Instruction Manual