User's Guide

1.
2.
3.
4.
a.
b.
c.
d.
6. Fixture Management
a. Fixtures
Fixtures are 12v/24v Constant Voltage LED lights that are directly connected to the ControlBright Light Engine. These Fixtures include Single
Color, RGB (Red, Green, Blue), and RGBW (Red, Green, Blue, White). Each Fixture is assigned to a Device within the portal.
When adding a fixture, the following parameters need to be configured:
Fixture Name - This should include physical attributes of the Fixture, including: Length, LED Density, and LED Size
Fixture Type - Options include Single Color, RGB, and RGBW
Assigned Device - Each Fixture is assigned to certain channels on a specific Device. For example, the RGBW strip in the screenshot
below is assigned to channels 1-4 on Device: Middle Fixture - 3920-38283d (the serial number).
Fixture Channels - Each color in a Fixture is assigned a unique channel, and channels are configured on the Light Engines in groups of
4. For example, the CB-8 is an 8 channel device that is made up of two 4-channel banks. Bank A on the Light Engine is preset from the
factory starting at channel 1-4, and Bank B is preset to channel 5-8. The following color and channel assignments are typical:
Channel 1 - Red
Channel 2 - Green
Channel 3 - Blue
Channel 4 - White
Each Fixture color needs to be matched to the proper channel in the portal and Device. Mis-configuring channels and colors will result
in unexpected light performance (though the Fixture and Device will not be damaged).