User's Manual

Security Profiles
Under the Security Profiles
tab, you will be able to configure security profiles that can be used when
creating SSIDs under the configuration tab.
• Profile Name:
Create a name for the security profile.
• Encryption: Se
lect an encryption type for your security profile
Encryption, WPA PSK, WPA2 PSK, and WPA/WPA2 PSK.
o No Encryption
: This will leave your profile without security
o WPA PSK
: Password must be at least 8
protocol
(not recommended).
o WPA2 PSK
: Password must be at least 8 characters long. AES
(Recommended)
o
WPA/WPA2 PSK
as Mixe
d Mode and uses TKIP encryption.
NOTE: Passwords may only contain numbers and letters
allowed. Example
Security Profiles
tab, you will be able to configure security profiles that can be used when
creating SSIDs under the configuration tab.
Create a name for the security profile.
lect an encryption type for your security profile
.
The four available options are, No
Encryption, WPA PSK, WPA2 PSK, and WPA/WPA2 PSK.
: This will leave your profile without security
(not r
ecommended)
: Password must be at least 8
characters long.
This is a legacy encryption
(not recommended).
: Password must be at least 8 characters long. AES
-
only encryption.
(Recommended)
WPA/WPA2 PSK
: Password must be at least 8 characters long. This feature is also known
d Mode and uses TKIP encryption.
NOTE: Passwords may only contain numbers and letters
.
Special characters are not
allowed. Example
s of special characters: (!@#$%:;^&*).
tab, you will be able to configure security profiles that can be used when
The four available options are, No
ecommended)
.
This is a legacy encryption
only encryption.
: Password must be at least 8 characters long. This feature is also known
Special characters are not