User's Manual

LAN
• IP Network Setting
: If your
“
Obtain an IP address automatically
DHCP pool (
Not recommended
•
Specify an IP address (default):
appropriate entries in the text boxes for
and Secondary DNS.
• Click “Apply”
to apply the changes.
Management VLAN
Warning: Do not enab
le this feature unless you need to
If configured incorrectly,
the access point will become inaccessible and will need to be
default. VLAN
tagging can only be set on a managed switch capable of usin
• VLAN ID
for Management:
VLAN.
• In the VLAN ID
text box, enter the
functions of the WX-1
x through. For example, if
• Click Apply
to save your changes.
: If your
WX-1x
is connected to a DHCP server (such as a router), choose
Obtain an IP address automatically
”. Your WX-1x will be assign
ed an IP address from the
Not recommended
).
Specify an IP address (default):
Select this option if you want to use a static IP address. Type the
appropriate entries in the text boxes for
IP Address, IP Subnet Mask,
Default Gateway
to apply the changes.
le this feature unless you need to
tag the
default VLAN on the access point
the access point will become inaccessible and will need to be
tagging can only be set on a managed switch capable of usin
g
VLANs.
for Management:
To turn on VLAN Management, check
Enable under Management
text box, enter the
number of the
VLAN you want to access the administrative
x through. For example, if
VLAN3 is used for management, type in 3.
to save your changes.
is connected to a DHCP server (such as a router), choose
ed an IP address from the
Select this option if you want to use a static IP address. Type the
Default Gateway
, Primary
default VLAN on the access point
.
the access point will become inaccessible and will need to be
reset to factory
VLANs.
Enable under Management
VLAN you want to access the administrative
VLAN3 is used for management, type in 3.