pakedgedevice&software inc WX-1-O 802.11ac Dual Band Access Point User Guide Version 1.
WX-1-O User Guide Version 1.0 Content Introduction ............................................................................................................................................................................................ 4 System Requirements ......................................................................................................................................................................... 5 Hardware Installation .......................................................
WX-1-O User Guide Version 1.0 LEDs ................................................................................................................................................................................................... 46 Maintenance ........................................................................................................................................................................................ 47 Username/Password ...........................................................
WX-1 1-O User Guide Version 1.0 Introduction Thank you for purchasing the Pakedge WX-1x 802.11ac Dual Band Access Point. As the central component of your wireless network, the WX-1x provides you with high-speed, high high-range wireless AC networking. The WX--1x broadcasts on both the 2.4 GHz and 5 GHz band so that select devices can choose their preferred source of wireless internet, internet, improving the overall stability, reliability reli and performance of the wireless network. Each band (either 2.
WX-1 1-O User Guide Version 1.0 • WDS Repeater – The repeater also receives wireless signal from from another access point. However, unlike a brige access point, a repeater access point sends out Wi-Fi Wi Fi so that client devices can connect to it wirelessly. The functionality of the WX-1x changes d depending on its operating mode. This his manual offers both general and mode-specific specific content.
WX-1-O User Guide Version 1.0 System Requirements The minimum system requirements for the WX-1x are: • PC or MAC book compatible with an Ethernet interface • Operating system that supports an HTTP web browser Hardware Installation Note: the product is designed for specific application and must be professionally installed by a qualified individual with RF and related knowledge. WX-1-O Installation 1. 2. 3. 4. 5. Place the unit in an appropriate place using the mounting kit.
WX-1-O User Guide Version 1.0 Antennas Weather Proof RJ-45 Be sure to run the Ethernet cable through the plastic element, and seal it tightly to insure weatherproofing.
WX-1 1-O User Guide Version 1.
WX-1 1-O User Guide Version 1.0 Power Method for the WX-1x WX The diagrams below show using a PoE PoE+ injector or a PoE+ switch to power the WX-1x. WX Note: the product must be powered by 802.
WX-1 1-O User Guide Version 1.
WX-1-O User Guide Version 1.0 The WX-1x can be configured in several modes: Access Point, WDS Root Access Point, WDS Repeater or WDS Bridge. When shipped from the factory, the WX-1x is set to Access Point mode. The default IP address of the WX-1x is 192.168.1.250 and username/password of pakedge/pakedgea. In order to log into the WX-1x, you must first configure the TCP/IP settings of your PC/Notebook. Follow these steps: 1.
WX-1-O User Guide Version 1.0 3. Select Use the following IP Address and type the IP address and subnet mask, as in the example below. (Be sure the IP address and subnet mask are on the same subnet as the WX-1x.) WX-1x IP address: PC IP address: PC subnet mask: 192.168.1.250 192.168.1.10 255.255.255.0 WX-1x Start Up To configure the WX-1x through a web browser, type the IP address of the WX-1x (default 192.168.1.250) and press Enter.
WX-1 1-O User Guide Version 1.0 The WX-1x login dialog appears. In the username box, type pakedge. pakedge In the password box, type pakedgea and click Login. The WX-1x main menu appears (see figure below). The main menu displays the current status of WX-1x and general information such as the IP address, subnet mask, and MAC addresses. The 2.4 GHz and 5 GHz sections display the device operating mode, wireless mode, channel bandwidth and channel settings.
WX-1 1-O User Guide Version 1.0 Menu Options The navigation bar on the top of the window comes with 4 options: • Status: Shows the dashboard and logs of the WX-1x access point. The dashboard is the default page that comes up when you log into the WX-1x GUI. • Network:: User can make changes to the network settings, such as the LAN, wireless settings, and transmit power settings. • Management: View diagnostics, enable SNMP, and control your LEDs.
WX-1 1-O User Guide Version 1.0 Dashboard The Dashboard is the default landing page of the access point. You can also access this page by hovering over the Status icon and clicking Dashboard.. This page displays the MAC and IP addresses, addresses operation mode, WLAN information, SSIDss and connected clients.
WX-1 1-O User Guide Version 1.0 System Log The System Log page has an activity log that can be used by Pakedge Technical Support for troubleshooting purposes. • System log buffer size:: Maximum value of the buffer is 10240 KB (10MB), (10MB) which is also the default setting. • External system log server server:: An external server may be set up to receive log activity. Enter the IP address of the external server.
WX-1 1-O User Guide Version 1.0 Network Ping Hover over Management and click on Diagnostics. You will be directed to the ping test under the Ping tab: • Ping – o Target IP / Domain Name Name:: Enter the IP Address of a location to ping. 8.8.8.8 is a Google DNS server. o Click Start to start the test.
WX-1 1-O User Guide Version 1.0 Traceroute Click on the Traceroute tab. A Traceroute test can help you identify obstacles you may have in the network. The Traceroute text maps the path for packets moving between the WX-1x and the e target location. To run a Traceroute test, enter an IP Address or Domain Name into the Target IP / Domain Name textbox and click Start to begin the test. If the test fails to complete or takes too long, click Stop.
WX-1 1-O User Guide Version 1.0 SNMP Hover over Management and click on SNMP. • Location:: Enter the physical location of the WX-1x as a reference. • Contact:: Enter the contact information of the installer or network administrator for the SNMP manager. • Description:: Enter in a description of the device. The default efault description is Pakedge WX-1x WAP.
WX-1 1-O User Guide Version 1.0 LEDs Hover over Management and click on LEDs. • Turn off all LEDs:: Check to turn LEDs LED off.
WX-1 1-O User Guide Version 1.0 Username/Password Hover over Maintenance and click on Username/Password.. You can change the username and password for the device here.
WX-1 1-O User Guide Version 1.0 Time Zone Hover over Maintenance and click on Time Zone. This page allows you to set up the timezone.
WX-1 1-O User Guide Version 1.0 Firmware Allows you to update the firmware for the unit. • Keep Settings: Selecting this will preserve your current configurationss after the firmware update. • Local Image: Click Choose File to select the firmware file. • Local Update: Updatess the firmware with the file you selected. • Check Update:: This feature will only work if the WX-1x is connected to o the internet.
WX-1 1-O User Guide Version 1.0 Configuration Hover over Maintenance and click on Configuration: • Download backup:: Click Download Configuration to save and export the current settings of the WX-1x. • Reset to defaults: Click Factory Default to reset the the WX-1x back to its factory default settings. • Restore backup – Load oad a configuration file using the Browse button to restore the WX-1x to a previous configuration.
WX-1 1-O User Guide Version 1.0 Reboot Hover over Maintenance and click on Reboot. Reboot Clicking licking the Reboot Button allows you to reboot the device.
WX-1-O User Guide Version 1.0 Appendix A – Specs HARDWARE SPECIFICATIONS • 1 x 10/100/1000 Gigabit Ethernet RJ-45 port with IEEE 802.3at Power over Ethernet (PoE+) support • Configurable LED Indicators for Power, Ethernet, 2.4GHz Wireless and 5GHz Wireless • Power over Ethernet (PoE+) IEEE802.3at compliant • Power Supply: 100 to 240 VDC ± 10%, 50/60 Hz (depends on different countries) • DC input: 12V/2A RF INFORMATION • • Frequency Band: o 802.11 B/G/N on 2.4 to 2.
WX-1-O User Guide Version 1.0 O 2.
WX-1-O User Guide Version 1.
WX-1-O User Guide Version 1.0 3847 Breakwater Avenue Hayward, CA 94545-3606 Southern California Office: Pakedge Device & Software 17011 Beach Blvd. Suite 600 Huntington Beach, CA 92647-5946 Appendix D – Limited Warranty Model WX-1x Congratulations on your purchase of a Pakedge Device & Software wireless product! Pakedge designs and manufactures the finest home networking products. With proper installation, setup, and care, you should enjoy many years of unparalleled performance.
WX-1-O User Guide Version 1.
WX-1-O User Guide Version 1.0 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WX-1-O User Guide Version 1.0 2. Installation location The product shall be installed at a location where the radiating antenna can be kept 22cm from nearby person in normal operation condition to meet regulatory RF exposure requirement. 3. External antenna Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC limit and is prohibited. 4.
WX-1-O User Guide Version 1.0 • Installation of this product must be in accordance with national wiring codes and conform to local regulations. • Avoid using this product during an electrical storm. There may be a risk of electric shock from lightning. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug the power supply, and disconnect the CAT5e to the WX-1-O at the PoE+.
WX-1-O User Guide Version 1.0 pakedgedevice&software inc 3847 Breakwater Avenue Hayward, CA 94545 17011 Beach Blvd. Suite 600 Huntington Beach, CA 92647 (650) 385-8702 www.pakedge.com sales@pakedge.
