User's Manual

2
The final host/module combination may also need to be evaluated against the FCC Part 15B
criteria for unintentional radiators in order to be properly authorized for operation as a Part 15
digital device.
If the final host/module combination is intended for use as a portable device (see
classifications below) the host manufacturer is responsible for separate approvals for the SAR
requirements from FCC Part 2.1093 and RSS-102.
The module incorporates a MuRata radio module with a single transciever output that
connects to an RF switch for diversity. The switch drives two MHF 4L coaxial sockets to
which a dipole antenna can be attached.
Signal and power connector
Connect signal and power through Novastack 35-P board connector details:
I-PEX Connectors: 20709-050E-01 0
CONN, 50PIN PLUS 2 POWER RECEPTACLE 0.7MM HEIGHT 0.35MM PITCH