User's Manual

1
Wi-Fi Module
Integration Instructions
Model: 040-00460
This module has been granted modular approval for mobile applications. OEM integrators for
host products may use the module in their final products without additional FCC/IC (Industry
Canada) certification if they meet the following conditions. Otherwise, additional FCC/IC
approvals must be obtained.
The host product with the module installed must be evaluated for simultaneous
transmission requirements.
The user manual for the host product must clearly indicate the operating requirements
and conditions that must be observed to ensure compliance with current FCC/IC RF
exposure guidelines.
To comply with FCC/IC regulations limiting both maximum RF output power and
human exposure to RF radiation, the maximum antenna gain including cable loss in a
mobile-only exposure condition must not exceed 2dBi.
The antenna used must be equivalent to the following:
Manufacturer:
ACON, Advanced-Connectek Inc.
Manf. part
number:
ACON_ADEEE-000000
Type: Swivel dipole, reverse SMA
Frequency
range:
2.4 GHz - 2.5 GHz
5.15 GHz - 5.85 GHz
Impedance:
50Ω
VSWR: 1.92:1 max.
Return loss:
-10 dB
Gain (peak): 2.0 dBi
Cable
attachment:
MHF 4L Plug to RSMA. 50Ω RG-178,
< 10 inches in length, low loss up to 6 GHz
A label must be affixed to the outside of the host product with the following
statements:
“Contains FCC ID:
2AJACWIFIMOD”
“Contains IC:
7848A-WIFIMOD”

Summary of content (7 pages)