User's Manual

User’s Guide
7
4. Web Management Settings
START UP & LOGIN
In order to configure the Wireless 11g AP, you must use your web browser and manually input
http://192.168.1.250 into the Address box and press Enter on explorer. The Main Page will appear.
Once you have logged-in this unit, it is a good idea to enable the password protection to ensure a
secure protection to the Wireless 11g AP. The Security Settings section described later in this manual
describes how to change the password.
Once you have input the correct password and logged-in, the screen will change to the Setup page
screen.
TURN ON POWER SUPPLY
Quick power cycle can caused system corruption. When power on, be careful not to shut down in
about 5 seconds, because data is writing to the flash.
Before Starting
The default IP address setting for the unit is a class C IP address (192.168.1.250/ 255.255.255.0).
Please make sure that the current workstation is following the class C IP address range, from
192.168.1.1 to 192.168.1.254 if
y
ou would like to do an
y
confi
g
uration b
y
this workstation.