User's Manual

W7x User M anual
43
• Key Length: From the drop-down list, select a key format. 64bit-hex keys require 10 characters; 128-bit
keys require 26 characters. A hex key is formatted in hexadecimal notation as a number between 0-9
followed by a letter between A-F.
• Default Key: From the drop-down list, select the number of the key to be used; you can define four keys
(Key1…Key4) in the text boxes.
• Key 1-4: Enter up to four unique WEP keys.
• Click Accept to apply the changes. The SSID profile window will close and you need to click on Accept
under the Network Settings window for the changes to take effect.
• Security Mode: If your wireless network uses a WPA pre-shared key, select WPA-PSK or WPA2-PSK from
the drop-down list.
• Encryption: In the drop-down list, select the type of encryption your wireless network uses: TKIP or AES.
• Passphrase: In the text box, type a passphrase of 8-63 characters that will be shared among the Access
Points and clients.
• Click Accept to apply the changes. The SSID profile window will close and you need to click on Accept
under the Network Settings window for the changes to take effect.
WIRELESS MAC FILTER
On the W7x’s main menu, in the Wireless section, click Wireless MAC Filter. The Wireless MAC Filter page
appears where you can allow or block access to the network by clients with specific MAC addresses.
• ACL Mode: To block a client from associating with the W7x, or to deny or allow access by a client with a
MAC on a list, select the appropriate option from the drop-down list.