User's Manual

W7x User

anual

•

Data Rate: From the drop-down list, choose the data transmission rate for the device (It is set to Auto by

default.)

•

Transmit Power: The power needed depends on the

distance of the devices in your wireless

network. From the drop-down list, select the desired power. You can use this feature to limit the

coverage area of the wireless network.

•

RTS/CTS Threshold: Type the packet size threshold for RTS/CTS (Request to Send/Clear to send) to occur.

CLIENT LIST

The Client List menu appears only when the W7x is operating under Access Point mode or repeater mode. This

menu will show all the devices connected to the W7x. From the Client List, you can click on “Block” and this will

prevent the device from connecting.

NOTE: If you want to block a device from connecting on both the 2.4GHz and 5GHz band, then you must click on

“Block” under both the 2.4GHz and 5GHz client list.

C L I E N T B R I D G E M O D E

NOTE: The options in the main menu of the W7x change depending on the current operating mode of the

W7x. The main menu options discussed in this section are those available in Client Bridge mode.