User's Manual

W7x User M anual
32
• ACL Mode: To block a client from associating with the W7x, select Disabled from the drop-down list. Or to
deny or allow access by clients with a MAC that you type in a list, select Allow MAC in the List or Deny
MAC in the List in the drop-down list.
o If you select Allow MAC in the List, only clients whose MAC addresses are on the list in the table
will be able to access the network, and other clients will be blocked.
o If you select Deny MAC in the List, clients whose MAC addresses are on the list will be unable to
access the network, but all other clients will be granted access.
• MAC Address: In the text box, type a client’s MAC address and click “Add” to add the client to the list.
• The table at the bottom of the page lists MAC addresses you have blocked or allowed. To delete selected
MAC addresses, or delete all the addresses in the table, select the address (es) in the list and click Delete.
• Click Accept to save your changes.
ADVANCED
You can configure the performance of your wireless network by changing the Data Rate, Transmit Power,
and RTS/CTS Threshold.