User's Manual

W7x User M anual
21
• Click “Apply” to save your changes.
NOTE: For any changes to take effect, you must click the “Save Changes” button on the lower left below the menu.
This will reboot the access point, applying the configuration changes.
N E T W O R K
L AN S E T T I N GS
On the W7x main menu, the Network group has three options:
• LAN Settings
• Spanning Tree Settings
• SNMP Settings
To configure the IP address of your W7x, in the Network section of the W7x main menu, click “LAN
Settings”. In the LAN Settings page, you can configure the W7x with a static IP address, or obtain an IP address
automatically using a DHCP client.
• Network Setting: If your W7x is connected to a DHCP server (such as a router), choose “Obtain an IP
address automatically”. Your W7x will be assigned an IP address from the DHCP pool (Not
recommended).
• Specify an IP address (default): Select this option if you want to use a static IP address. Type the
appropriate entries in the text boxes for IP Address, IP Subnet Mask, Default Gateway, Primary and
Secondary DNS.
• Click “Accept” to apply the changes.