User's Manual

W7x User M anual
20
F IR MW AR E
In the W7x main menu, in the System group, click “Firmware”. In the Firmware page you can upgrade
your W7x’s firmware. To perform a firmware upgrade, you must first download the correct firmware from the
Pakedge website under the Dealer Portal section.
• Click “Browse” and choose the firmware file that you downloaded from the Pakedge site.
• Click “Upgrade”.
Note: The upgrade usually takes at least 1 minute. During the firmware upgrade process, do not turn off the
device – doing so can damage the W7x. Once the upgrade completes, the device will restart automatically.
T IM E
Click “Time”, under the System group in the W7x main menu. The Time page is used for configuring the
time on your W7x unit. You can configure the time manually, synchronizing with your PC or by using an NTP time
server.
• Manually Set Date and Time: Type the date and time or synch it with your PC’s clock.
• Automatically Get Date and Time: Choose the time zone of your location from the drop-down list.
• User Defined NTP Server: Type the IP address of the NTP server.