User's Manual

W7x User M anual
18
PR O PE R T IE S
Under the System section in the W7x main menu, click “Properties”. The Properties page is where you can
specify a name for the device, and switch the W7x’s operating mode.
• Name: Type a name for the device. (Note: This name is not used as the device SSID.)
• Mode: Select an operating mode. (For detailed information on configuring operating modes, see the
chapter on Mode-Specific Setup.)
• To save your changes, click “Apply”.
NOTE: For any changes to take effect, you must click the “Save Changes” button on the lower left below the menu.
This will reboot the access point, applying the configuration changes.
A D MIN IS T R AT IO N
Click “Administration” under the System group in the W7x main menu. The Administration page allows
you to specify a user name and password for the W7x. By default, the W7x is configured with a default name of
pakedge and a default password of pakedgea. For security reasons, it is imperative to change the default user
name and password.