User's Manual

Web Management User Guide
- 7 -
Figure9 Basic information Page
（2）Serial port information page
Figure 10 is a serial port configuration page, the page displays serial baud rate and other
related information. When the host through the serial port terminals (such as Windows,
HyperTerminal) to the management of switches, serial console on the COM port configuration
must be consistent with this page information.
Figure 10 Serial port information page
（3）User management page
Figure 11 is a user management page, the user can modify this switch anonymous user
(admin) password, Telnet and the Web without opening a multi-user, they all use the same
anonymous user's password. Passwords are case-sensitive, and can be up to 16 characters. If
you want to change your password, the user need to enter the new password twice, once the
user clicks the application button, the new password is activated, then if the switch is not
enabled multi-user, will display the login dialog box (as shown in Figure 7), require the user to re
- login the web page, with a new anonymous user password.
Meanwhile through this page user can configure the multi-user, switch if in the default is no
multi-users, that is, not enabled the multi-user management functionality, at this time does not
require multi-user login user name and password authentication. For Telnet, when adding a
user name, multi-user management features were enabled, and when removed all of the user,