User's Manual

Web Management User Guide
- 27 -
Figure 43 802.1x user authentication information page
11、PoE port configuration
（1）PoE port Configuration Page
z Figure 17 is the PoE port configuration / PoE-display page. Users can enable or
disable the port's PoE function to the page, or View all ports of PoE information.
To set a specific port, users need to select the appropriate port name on port
drop-down menu. The default port's PoE status is up. Can select the drop-down menu
-down to disable the port's PoE function. On this page the user can view all ports PoE
information.
Information can be seen in the following tables:
1， PoE Staus： Enalbe means PoE function is available；Disable means PoE function
is close.
2，
Class： Displays the current Class levels（Note: The information will not be
updated until inserted in the new PD）。
3，
Discoery：Fail means PD is disconnect；Normal means PD is connecting.
4，
Fault：Shows the abnormal state of the port PoE.
Figure 44 the PoE port configuration page