User's Manual

Web Management User Guide
- 25 -
Figure 40 the Radius configuration page
（2）802.1x Configuration Page
z Figure 41 is the 802.1x configuration page, users can configure 802.1x related
information on this page, including:
1. whether to activate the 802.1x protocol, when doing authentication and accounting
must be to start 802.1x protocol.
2. switch is to adopt a common authentication method or the expansion of
authentication.
3. whether to open re-authentication function, the default is not open .when you do
authentication and accounting based on the actual circumstances. Open the
re-authentication feature will make users more reliable when using the authentication
and accounting, but it will slightly increase the network traffic.
4. Setting re-certification time interval, only to re-open the case of authentication to be
valid, the default is 3600 seconds, when you do authentication and accounting based
on the actual situation to set the value, but the value is not too small.
5. Quiet Period Timer, users typically do not need to modify this field.
6. Tx-Period Timer, users typically do not need to modify this field.
7. Server timeout timer, users typically do not need to modify this field.
8.supplicant timeout timer, users typically do not need to modify this field.
9. Max Request number, users generally do not need to modify this field.
10.showing Reauth Max size.
11. Client Version, the client version number.
12.Check Client, whether the certification passed then examine the client's regular flow
of packets.