User's Manual

Web Management User Guide
- 24 -
Figure 39 the host static route configuration page
11、Certification. Authorization. Accounting (AAA) configuration
（1）Radius Configuration Page
z Figure 40 is the Radius configuration page, users can configure with the
Radius-related information, you can set information includes:
1. Be sure to set the Radius server's IP address before do the authentication and
accounting in this field,
2. Optional Radius server IP address, if there is spare Radius server can set this field.
3. Authentication UDP port, the default value is 1812, the user generally do not need
to modify this field.
4. whether to activate the , the default is to start, and when you do authentication and
accounting in general to start charging.
5. Accounting UDP port, the default value is 1813.
6.shared secret key is used to setting the shared encryption password between the
switch and the Radius server, so be sure to set the authentication and accounting in
this field, and with the same settings on the Radius server.
7. vendor-specific information, the users typically do not need to modify this field.
8. NAS ports, NAS port type, NAS type of service, these three values do not change
in general.
9. whether to on or off the roaming feature of Radius.