User's Manual

Web Management User Guide
- 20 -
Figure 32 The VLAN port configuration page
8、SNMP Configuration
（1）SNMP share body configuration page
Figure 33 is a shared body of SNMP configuration page that allows users to configure
the switch common body's name and read and write access, A total of 8 entries can be
configured
By default, the switch there is a share name as named public, the common body is
read-only access. With this correspondence, the activities of this page is only one entry, shared
body names are public, access is read-only access. When the switch through SNMP for network
management, you need to configure a read-write permissions to the shared body
.
Figure 33 a shared body of SNMP configuration page
（2）TRAP target configuration page
Figure 34 is theTRAP target configuration page that allows users to configure the
workstation to receive TRAP messages as well as the IP address ofTRAP protocol packets of
some of the parameters.
In the configuration entry, the name used to enter the TRAP name, IP address used to
enter the target address, SNMP version used to select the version of the TRAP packet, if you