User's Manual

Web Management User Guide
- 14 -
Figure 22 protected port page
（7）Port Learning restrain page
Figure 23 is the port learning restrain page. This page used to restrict the port can learn of
the MAC address of the number, range is 0-8191. The default value is 8191, also is the
maximum that the port is not configured the learning restrain
Figure 23 Port Learning restrain page
（8）Port Trunking configuration page
Figure 24 is the port trunking configuration page,. This page allows the user to configure
the port trunking. This page consists of four parts: port trunking ID selection, port trunking
method selection, configurable ports and group members port.
To create or modify the port trunking, the user need to select a port trunking ID, port trunking
ID from 1 to 3. The user clicks the list box the appropriate port trunking ID, the port trunking of
information displayed in the group port. To create a Trunk group, select the appropriate ID in the
port trunking ID, click the button "Trunk ID Settings." To set the port trunking method, select one
port trunking method, click the button "polymerization Settings." To increase the trunking ports,
the port can be configured to select the trunking port in the configurable, click on "members of
the port =" "key. Aggregation from the existing port to remove a port group member ports in the
trunking port selected, click on "non-member port" = "key. To delete the entire TRUNK group,
then click the "Delete trunk group" button.