User's Manual

Web Management User Guide
- 13 -
Figure 20 Broadcase Storm control Page
（5）Port speed limits page
Figure 21 is the port speed- limit page. This page is used to configure the port ‘ssend
and receive rate
From the Port drop-down bar select the configure ports. Bandwidth control of the send
datapackets is used to configure and display the bandwidth control it , the range is 1-1024000,
unit kbits, enter into force after the key press applications. If the port is not configured bandwidth
control, shown as off. Cancel button is used to cancel the corresponding data packet to send
bandwidth control. Receiving data packets is used to configure and display the bandwidth
control of receive data packets control ,the range is 1-1024000, unit kbits, enter into force after
the key press applications. If the port is not configured bandwidth control, shown as off. Cancel
button is used to cancel the corresponding receiving data packets bandwidth control
Figure 21 Port speed limit page
（6）Port protection page
Figure 22 is the Port protection page. This page is used to configure the port for the
protection port.
If the port is configured as a protected port, the ports can not exchange the data with each
other , protected port only with non-protected port for data exchange.