User's Manual

Web Management User Guide
- 9 -
Figure 12 Security management page
（5）Configure the current page
Figure 13 is the current configuration page. the user can view the current configuration of
the switch on this page. Save key is to store the current system configuration in the
configuration file. Because the storage operation requires erase& write FLASH chips, which
take up some time. When the user was configured on the page and hope to restart the switch
from using these configurations are not lost, you must exit the page before the current
configuration page, click the Save button.
Figure 13 the current configuration page
（6）Configuration page
Figure 14 is profile configuration page. This page allows users to view the system's initial
configuration. The initial configuration is actually the configuration file in the FLASH, when the
configuration file does not exist in FLASH, the system starts using the default configuration.
Delete key to delete the configuration file in the FLASH. Click the Delete button, will pop up a
dialog box ,that will prompts the user sure to delete the configuration file or not, according to the
dialog box to determine if it's ok, otherwise click Cancel button. Download button is used to
downloaded a configuration file to the PC. Click to download button, will pop up a dialog box,
users select Save and save the configuration file directory path. Download the configuration file
names are as switch.cfg.