User guide

19
Changing the wallpaper
To change the wallpaper background of your Control4 menu:
1 Select Settings, then Wallpaper. The wallpaper selection screen opens.
2 Select from the available images, or Black for no background. The
wallpaper changes immediately on all Navigators.
Managing power (for battery-powered touch screens only)
To manage power consumption:
1 Select Settings, then Power Management.
2 Change the backlight and suspend settings as needed.
Adjusting the backlight (for touch screens and on-screen only)
To adjust the backlight:
1 Select Settings, then Backlight.
2 Move the scrollbar up or down to adjust.
Viewing and changing advanced settings
Use Director to view your current Director (the software that controls your
system), connect to it, or add/remove a Director. (Usually only of interest to
your Control4 Dealer.)
Use Network (touch screens only) to view or change general network settings.
(Usually only of interest to your Control4 Dealer.)
Use Settings to view or change your network settings. (Usually only of interest
to your Control4 Dealer.)
Use Registration to view your registration status or register your controller.
(Usually already taken care of by your Control4 Dealer.)
Use About to display information about your system, such as Director version,
battery level, Navigator version, dealer information, IP address, and more.
Enabling a service connection
You can allow your dealer or Control4 to to view and access your system, if
needed for maintenance. (Remote Access required.)
To allow a service connection:
1 Select Settings, then Service Connection.
2 Select YES under Remote Service.
Note: Remote Access must be enabled. Ask your dealer for details.