Specifications
91
You can set the fan to:
On—This overrides the settings and turns the fan on
until manually turned off.
Low—This places the fan speed to the lowest setting.
Medium—This places the fan speed to the medium
setting.
High—The places the fan speed to the highest
setting.
Auto— This lets the heating and cooling system
control the fan usage as necessary to maintain
the temperature Heat Point or Cool Point.
NOTE: The system displays the large fan icon in the upper-
right corner whenever the fan is operating.
Change Hold Options
The Thermostat Hold options allow you to hold a desired
temperature setting, overriding the programmed schedule.
You can set the system to hold the temperature:
(1) Until the next programmed event,
(2) For two hours, or
(3) Permanently.
Hold Off—Cancels the current hold setting and prompts
the Wireless Thermostat to follow the programmed
schedule.
NOTE: The system automatically makes sure that the Heat
Point (the setting that turns the furnace on) is at least two (2)
degrees lower than the Cool Point (the setting that turns the air
conditioning on). This keeps the two (2) systems from
competing with each other.
Program the Thermostat
The Control4 Wireless Thermostat comes with a pre-programmed
schedule.