Specifications
20
1.
Press the LCD/List button on the System Remote Control.
2. Use the arrow keys to scroll down the list. Press Select to
select Info. Scroll down to Config, and then press Select
to set the LCD display preferences or to view the battery
level:
Display Brightness (SR-250)—Use the Right or Left
arrow keys to move the slider bar to brighten or dim
display.
Keypad Brightness (SR-250)—Use the Right or Left
arrow keys to move the slider bar to brighten or dim
the keypad display.
Motion Detect (SR-250)—Use the Up or Down arrow
keys for Off or On. Press Select again
Battery Level (SR-250)—View the battery level in
percent.
About—Lists the software version, date and time.
Set Contrast—Use the arrow keys to move slider bar
to increase or decrease contrast, and then press
Select.
View current battery level—Battery level is
displayed.
View the Version Number, Date, Time or MAC
Address
To view the System Remote Control part number and MAC address:
1. (SR-250) Press List, scroll down to Info, and then scroll
down to About to view the System Remote Control
version, date and time.
2. Press Cancel (Cncl) to exit the LCD Navigator.
NOTE: You can access the Preferences view on any Control4
Navigator (Info > Config) to adjust the brightness, Screen
Savers, backlight options, battery life, etc.