Specifications

17
Additional programmable buttons—Items can be
programmed by your Control4 Installer.
Install and Maintain the Batteries
Install the Batteries
Four (4) batteries are included with your System
Remote Control—either AAs or AAAs, depending on
your model number.
Install the batteries in the back of the device according
to the diagram provided in the battery compartment
(with the + and - terminals aligned correctly).
Use and Care of the Batteries
Keep the battery contacts and compartment clean.
Remove the batteries from the System Remote
Control if it is not going to be used for several months.
Extreme temperatures reduce battery performance.
Avoid putting the System Remote Control in very warm places.
Replacement Safety Rules for Batteries
CAUTION!
To prevent battery shorting, leakage or
rupture:
Use Alkaline batteries only in the System Remote Control.
Four (4) AAs for C4-SR250-Z-B
Four (4) AAAs for C4-SR150-Z-B and RCZ-SRC2-B
Do not mix battery types, such as Alkaline and
rechargeable NiMH batteries.
Do not attempt to recharge a battery unless the battery is
specifically marked “rechargeable.”
Never place, throw, or dispose of batteries in a fire.
+ AAA -
+ AAA -
+ AAA -
+ AAA -