Specifications
12
Programmable Buttons
The 7” Touch Screen also has four physical (4) buttons (just below the
screen) that can be programmed by your Control4 Installer. Check with
your Installer, and the write their functions in the list below. Refer to this
list when you need to. When you want to use the button, just press it.
NOTE: You can always find the custom buttons programmed into your
system in the House menu on any Navigator.
Custom Buttons Programmed by Control4 Installer:
A: ______________________________________
B: ______________________________________
C: ______________________________________
D: ______________________________________
LCD Keypad Basics
The LCD Keypad uses a combination of hard button presses
and the dial to navigate the devices.
About the LCD Keypad
1. Selection Buttons—Selects
the corresponding option (or
icon) on the screen.
2. Selection Dial—Scrolls
through the menus, acts as a
selection button and sets
room’s volume.
3. Shortcut Button— This
button is programmable. You can choose a specific action
such as turning off the lights, starting a playlist, or arming
the Security system.
If you have problems viewing a screen, or if the screen
displays "connecting..." or “no location,” contact your