Specifications
103
About—View the software version, the date, and the
time.
Connect to a Director
To connect to a Director (or to change Directors and switch the
system your Navigators are accessing) using a Touch Screen:
NOTE: For access to your system, you must be connected to
a Director.
1. From the Main menu, select Info.
The Info options bar or list is displayed.
2. From the Info options, choose the Director button. The
Connect to a Director screen appears.
3. In the Connect to a Director list of IP addresses, highlight
your Controller's IP address and select Connect.
View or Change Network Settings
From the Network Settings screen, you can view or change IP address
settings, DNS server settings, or wireless settings.
NOTE: The default IP configuration is DHCP Client. This
default setting assumes that your network system has a device
serving as the DHCP Server, such as a network gateway,
switch, or router. If there is not a DHCP server in the network,
you must choose another option. Contact your Control4 Dealer
for inquiries.