System information

87

None
 Heater
 Solar
Use the up and down arrows to adjust the temperature settings.
Adding or Hiding Relays
The default relays available are Filter Pump and Spa Heat. You or your
installer can add additional relays (up to 31 relays total; called auxiliary
circuits) through Composer. You can also rename relays using
Composer.
NOTE: Use Composer to hide controls not available on your
pool controller.
Changing System Information
System information can be viewed or edited on the navigation device
you are using. The device displays its system information, including
software versions, current Director IP address, Network addresses,
and screen savers.
Access the Info Screen
On-Screen Navigator or Touch Screen
1. From the Main menu, select Info.
2. Select the desired Info option.
 About—Provides system information, such as
Navigation version, Director IP, and Director version.
 Director—Provides a list of all home network
instances of Director, including the IP address for the
controller (such as Media Controller).