Technical data

6-16 Interactive Diagnostics Environment (IDE)
ip5 (intr_level0) - Check IP19 Level 0 Interrupt
This test generates level-0 interrupts at different priority values and execution levels. It also
checks multiple level-0 interrupts occurring at the same time.
Possible errors:
0103004: Level 0 interrupt pending failure : Priority 0x%x IP0 0x%llx IP1 0x%llx
0103005: Level 0 highest priority interrupt level failure : HPIL 0x%llx
0103006: Level 0 interrupt not indicated in Cause register 0x%x
0103007: Level 0 interrupt pending not cleared : IP0 0x%llx IP1 0x%llx
0103002: Configuration register %s R/W error : Wrote 0x%llx Read 0x%llx
0103008: Level 0 highest priority interrupt level not cleared : HPIL 0x%llx
0103009: Level 0 interrupt pending not cleared in Cause register : Cause 0x%x
010300a: Level 0 current exec level mismatch : Wrote 0x%llx Read 0x%llx
010300b: Level 0 interrupt not detected when priority >= CEL : Cause 0x%
010300c: Level 0 interrupt detected when priority < CEL : Cause 0x%x
010300d: Level 0 interrupt pending not cleared : Cause 0x%x
010300e: Level 0 highest priority interrupt level incorrect : Expected 0x7f Got
0x%llx
010300f: Level 0 multiple interrupt pending incorrectly indicated : Expected
0x6000000000000009 Got 0x%llx
0103010: Level 0 multiple interrupt pending incorrectly indicated : Expected
0x9000000000000006 Got 0x%llx
0103011: Level 0 multiple interrupt pending not cleared : IP0 0x%llx
0103012: Level 0 multiple interrupt pending not cleared : IP1 0x%llx
0103013: Level 0 multiple interrupt HPIL not cleared : HPIL 0x%llx
0103014: Level 0 multiple interrupt Cause not cleared : Cause 0x%x
0103015: Level 0 interrupt did not occur : Priority 0x%x
ip6 (intr_level3) - Check IP19 Level 3 Interrupt
This test generates level-3 interrupts using the EV_ERTOIP register.
Possible errors:
0103016: Level 3 interrupt pending not detected in CAUSE
0103017: Interrupting error not detected in ERTOIP
0103018: Level 3 interrupt pending not cleared in Cause : Cause 0x%x
0103019: ERTOIP not cleared via write to CERTOIP : ERTOIP 0xllx
010301a: Level 3 interrupt did not occur : ERTOIP 0x%llx
ip7 (intr_timer) - Check IP19 RTSC and Interval Timer
This test generates level-1 interrupt by writing a value into the EV_CMPREG configuration
registers so that the RTSC will reach this value and interrupts the processor.
Possible errors:
010301b: Invalid timer interrupt occurred
010301c: Interval timer interrupt did not occur
010301d: Group interrupt pending not cleared in Cause : Cause 0x%x