Technical data

6-14 Interactive Diagnostics Environment (IDE)
The following sections provide details about each test.
ip1 (local_regtest) - Check CC Local Registers
Basic write/read test for the local registers. The registers tested are limited to the following:
EV_WGDST Write gatherer destination
EV_WGCNTRL Write gatherer control
EV_IPO Interrupts 63 - 0
EV_IP1 Interrupts 127 - 64
EV_CEL Current execution level
EV_IGRMASK Interrupt group mask
EV_ILE Interrupt level enable
EV_ERTOIP Error/timeout interrupt
EV_ECCSB_DIS ECC single-bit error disable
The read-only registers are read and their contents are reported. These registers are:
EV_SPNUM Slot/Processor info
EV_SYSCONFIG System configuration
EV_HPIL Highest pending interrupt level
EV_RO_COMPARE RTC compare
EV_RTC Real time clock
EV_WGCOUNT Write gatherer count
Possible errors:
0103001: Local register n R/W error: Wrote value1 Read value2
In the above error message, n is the register name, value1 is the value written and value2 is
the value read.