User guide

System User Guide
Copyright © 2014 Control4. All Rights Reserved.
Saved: 10/28/2013 12:48:00 PM
200-00001 Control4 System
User Guide
Page 96 of 160
 °F/°C—Select to change from Fahrenheit to Celsius.
Note: When changing thermostat modes, there is an eight (8) minute delay before the next mode
starts.
3. (Optional) To set a regular thermostat schedule, see “Thermostat Scheduling.”
6.2.19.2 Cooling and Heating Features
Use the Control4 system Comfort icon on your Navigators to change your heating or cooling settings.
6.2.19.2 .1 Features
 Turn Heating or Cooling on or off.
 Adjust Heating or Cooling temperatures.
 Use an Auto setting so you don't have to make any adjustments.
 Use a Fan setting to change fan speeds (if applicable).
 Manage Heating or Cooling set points; adjust them up or down as needed.
 Set Hold modes to "Until Next Event," "Permanent," "2 Hours," or “Vacation.”
 Set the Heating or Cooling schedule.
6.2.19.3 Thermostat Scheduling
Use the Control4 system Comfort icon and Control4 Wireless Thermostat to schedule heating and
cooling.
To schedule the Thermostat:
1. Select Comfort from the home page, and then select the Wireless Thermostat icon on the next
page.
2. Select the Program button on the device controls. The following figures show the display on a
touch screen.