User guide

System User Guide
Copyright © 2014 Control4. All Rights Reserved.
Saved: 10/28/2013 12:48:00 PM
200-00001 Control4 System
User Guide
Page 133 of 160
6.2.21.7 .8 View or Change Network Settings
Use the Control4 system More > Settings > Network icons on your Navigators to view or change
your IP or wireless network settings.
Note: Not supported on MyHome apps.
This section shows you how to:
 View DHCP related addresses.
 Change IP settings.
 View DNS settings.
 View, enable, or disable wireless connections. Note: This only appears if you are on a
wireless touch screen, using a wireless MyHome app, or using a controller with a WiFi
adapter.
 Connect to a wireless network. Note: This only appears if you are on a wireless touch screen
or wireless MyHome app.
 Add wireless information. Note: This only appears if you are on a wireless touch screen or a
wireless MyHome app.
 View the signal strength.
 Refresh the settings.
To view the static or DHCP, IP, Subnet Mask, Router and DNS addresses:
1. Select More > Settings > Network.
2. Next to IP Settings, select DHCP or Static.
3. View the addresses.