User guide

System User Guide
Copyright © 2014 Control4. All Rights Reserved.
Saved: 10/28/2013 12:48:00 PM
200-00001 Control4 System
User Guide
Page 116 of 160
To prevent all calls and broadcast messages:
You can change the options on your supported touch screens if you don’t want anyone to disturb you.
This means no calls, broadcast messages, or videos. A ‘Do Not Disturb’ message displays on the
caller’s touch screen if disabled on the recipient’s touch screen.
1. On the touch screen, tap the Intercom icon.
2. On the Intercom page, tap the Modes icon.
3. Tap ON at ‘Do Not Disturb.’
6.2.21.2 .8 Intercom Groups
An intercom group is a set of intercom-supported touch screens that can be identified by a specific
group name. This saves time when you want to send a broadcast to a group of people.
Example: You can create a group (John’s Group) and then send a broadcast to that group. The
following steps show you how to manage Intercom groups on supported touch screens.
Note: You cannot add the Door Station to a group, but a specific group can be selected in Composer
Pro to notify all of the touch screens in that group that someone is at the door.
To create an intercom group:
Use the Create Group icon to create an intercom group and include several rooms.
1. On the touch screen, tap Intercom.
2. On the intercom page, tap the Create Group icon.