User guide

System User Guide
Copyright © 2014 Control4. All Rights Reserved.
Saved: 10/28/2013 12:48:00 PM
200-00001 Control4 System
User Guide
Page 110 of 160
9. Tap the Volume – or + buttons to adjust the volume. Note: Recipients can’t respond to a
broadcast.
10. To end the call, tap End Call if the caller doesn’t end the call first.
6.2.21.2 .3 Place a Call on Hold
The following steps show you how to place a call on hold to communicate with another touch screen
or Door Station. In this case, you can have conversations with people at two (2) touch screens or a
touch screen and a Door Station. When a call comes in, that touch screen or Door Station appears in
the upper-right corner of the touch screen.
To place a call on hold when another call comes in:
1. To place the touch screen you’re communicating with, for example, Gary’s Room, on hold tap
Hold & Answer. The room you just put on hold (Gary’s Room) appears in the upper-right corner
and the intercom button at the top of the screen is highlighted indicating that someone is on hold.
2. Answer the call for the touch screen or Door Station calling in, for example, Front Door.
Tip: You can choose not to answer the incoming call by tapping Ignore or ending the call on the
first touch screen (Gary’s Room) by tapping End Call.
3. When you’re finished communicating with Front Door, tap End Call, and then tap Gary’s Room
in the upper-right corner to continue the conversation unless you’ve already ended the call with
the person in Gary’s Room.
To place a call on hold and call another station:
1. Tap Hold. The room you just put on hold (for example, Gary’s Room) appears in the upper-right
corner and the intercom button at the top of the screen is highlighted indicating that someone is
on hold.
2. Tap the room to call. See “One-to-One Calls” for more information.
3. When you’re finished with the second call, tap End Call.
4. In the upper-right corner, tap the first room you called to resume the conversation.
5. Tap End Call when you’re finished with that call.
6.2.21.2 .4 Answer the Door Station
The following steps show you how to answer the Door Station.
To answer the Door Station:
1. When the Door Station and doorbell ring, if you are on a touch screen that supports audio and
video intercom, a video of the person at the door appears. Tap Answer Door or Ignore.
2. If you tapped Answer Door, speak into the touch screen.
3. To end the call, tap End Call.
Note: Because the Door Station doesn’t have video at that end and the caller can’t see you, two
(2) custom buttons appear on your screen where their video would normally appear on a touch