User's Manual

ManualsBrandsControl4 ManualsElectronicsEnergy Controller

Changing Your Set Temperature

From the Main Menu, tap Thermostat.

If you have more than one thermostat,

select the one you want to adjust.

Tap the Up and Down arrows to change

your set temperature. The thermostat

will automatically hold your new set

temperature for two (2) hours.

To return to your regularly-scheduled Thermostat Program Event before the end of the

two (2)-hour hold, tap Cancel. See “Programming Your WT-100 Wireless Thermostat” if

you want this to be a permanent change.

Note: By default, your set temperature and current temperature are displayed in

Fahrenheit. You may change to Celsius in the Settings screen (access from the Main

Menu).

From the Main Menu, tap Thermostat.

If you have more than one thermostat,

select the one you want to adjust.

Tap Program.

Tip: On the Program

page, you will notice that there are four

(4) Program Events (Wake, Leave,

Return, Sleep) for each day of the week.

You can set a different start time and

temperature for each Event for each day

of the week, or copy the same schedule

to all days of the week.

Programming Your WT-100 Wireless

Thermostat

Your WT-100 Wireless Thermostat comes pre-programmed with recommended heating and

air conditioning settings from Energy Star. To modify this program:

Select the day you want to adjust.

Select the Program Event that you want

to change (Wake, Leave, Return, Sleep).

Adjust the start time Event by tapping the

Up and Down arrows on the screen. An

Event ends when the next one begins.

Select your desired Heating and Cool-

ing set temperatures for the Event.

• The Heat set temperature is used

when your thermostat is in Heat

mode.

• The Cool set temperature is used

when your thermostat is in Cool

mode.

Tap Next if you want to adjust the temperature or start time for the next Event (repeat

Steps 6 and 7 for any other Event you want to change), or tap Save and Close if you

are ﬁ nished adjusting the Events for that day.

To copy the schedule you have created to other days, tap Copy To and choose the days

you want to copy the current schedule to.

Note: When you ﬁ nish changing the program, the EC-100 will send the program

wirelessly to the WT-100 Wireless Thermostat. This process may take several minutes

to complete.

Viewing Your Electricity Use Information

Your EC-100 lets you see how much electricity your home uses, how much electricity major

systems in your home use (air conditioning, etc), and how this changes over time.

Note: It will take several days, weeks, and months for all charts to show valuable data, as

the EC-100 gathers data over time.

From the Main Menu, tap My Energy.

You can then view your current Real Time

Electricity, or select either Electricity Use or

Use by Device to see more detailed energy

consumption data.

• View the data in terms of cost ($) or

electricity consumption (kWh).

• Select the unit of time (Day, Week,

Month, Year), and review other time

periods by tapping the arrows next to the

displayed date range.

• Tap View to view different data and chart

your home’s electricity usage with other

homes like yours or with the outside

temperature, and more.

Viewing Your Utility Bill Information

Your EC-100 lets you view your utility bills. Note: This billing information may not be

available from your utility company.

From the Main Menu, select Utility Bills.

View bill data over a speciﬁ c time period, or

tap Compare Bills to compare detailed use

and billing.

Vacation Hold

From the Main Menu, tap Thermostat.

If you have more than one thermostat, be sure

to select the one you want to adjust.

Tap Vacation.

Choose your Mode (Heat, Cool or Off), and

then specify your set temperature.

To apply Vacation hold, tap Start Now.

To end the Vacation hold, tap Cancel.

Repeat these steps for the other thermostats

in your home.

If you’re going to be away from your home for an extended period of time, but you do not

want to turn your Thermostat off, you may set a ‘Vacation’ hold.

Changing Your Thermostat Mode

If you want to change your mode: Heat, Cool, Fan, follow these steps.

From the Main Menu, tap Thermostat.

At the bottom of the thermostat screen, set the

Mode (Heat, Cool, or Off).

Tip: In the Off mode

neither the furnace nor the air conditioner will

turn on regardless of the temperature of your

home.

Set the Fan state (Auto or On).

Messages

From the Main Menu, tap Messages to view messages from your utility company.

About this Document

tiﬁ ed logo, the Control4 iQ logo, Everyday Easy, and Inﬁ nityEdge are registered trademarks or trademarks

of Control4 Corporation in the United States and/or other countries.

Part Number: 200-00197 Rev B 11/2/2010

Warranty

For complete warranty information, including details on consumer legal rights as well as warranty exclu-

sions, visit www.control4.com/warranty.

Regulatory Compliance

FCC/Industry Canada

FCC ID: R33D1/Canadian IC : 7848A-D1

This device complies with Part 15 of the FCC Rules Sub-Part B and C and also with Canada ICES-003

and RSS-Gen. Operation is subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may

cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B and C digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-

nected.

• Consult the dealer or an experienced radio/TV technician for help.

This product has been tested to the requirements of, and shown to be in

compliance with, the following requisite standard:

Australia/New Zealand

• AS/NZS CISPR 22:2006/A1:2007.

IMPORTANT! Any changes or modiﬁ cations not expressly approved by the party

responsible for compliance could void the user’s authority to operate this equipment.

Recycling

For information on recycling, please go to www.control4.com/recycling.

Control4 Main Menu Buttons

• Thermostat: Adjust the set temperature or change the thermostat’s program.

• My Energy: View real-time and historic electricity use, total use, and device use.

• Utility Bills: View and compare your monthly utility bills if available from your utility

company.

• Messages: View messages from your utility company.

• Energy Events: View Energy Events from your utility company. Get notiﬁ ed in ad-

vance of an event, when it starts and ends, and a history. View information on current,

past, or future Energy Savings Events. During an Energy Savings Event, the utility

company may control your Thermostat to reduce overall electricity consumption.

• Settings: Set up your EC-100 for optimal use. View messages sent by your utility

company, adjust your screen brightness, adjust sound, set up or change your WiFi

connection, and more.

• Weather: View the current weather conditions, 36-hour forecast, or 5-day forecast.