User's Manual

NOTE:IfyouuseEthernetandundockthe
TouchScreen,youwillloseconnectivity
Figure6.BackViewwithPowerConnections
NOTE:Thepowercordanglestotherightand
isheldbytheretainingclip.Whenyouinsert
thepowercord,italsosnapsintotheretaining
clip.
3 InserttheTouchScreenintothedock’sslot.
4 WakeuptheTouchScreenbyeithertouchingthe
screenorbypressinganybutton.
Using the Touch Screen as a Tabletop Device
1 Placethe7”PortableTouchScreendockonaat
surface.
2 Power.Insertthepowercableintothepowerjack
slotonthebackofthedevice(seeFigure6),and
thenplugthepowercordintoawalloutlet.The
devicecanbepoweredusingeitheranEthernet
connectororaPoEconnector.TouseEthernet,
plugtheRJ-45connectorintothePoEconnector
andthenintotheEthernetjackonthebackof
theTouchScreendock(seeFigure6).
NowyoucanattachtheTouchScreentothe
dockusingthescrewsprovidedtopreventthe
TouchScreenfrombecomingdisconnectedand
nonfunctionaleverytimeitisremoved.
NOTE:PowerotheTouchScreenbefore
screwinginthescrews.
ToattachtheTouchScreentothedockingstation:
1 Removethetwo(2)rubberprotectorsfromthe
screwholesonthebottomoftheTouchScreen’s
Figure5.BackViewwithDockandConnections
Portable or Tabletop Installation
Options
Youcanusethe7”PortableTouchScreenasa
portabledevicethatyoucarrywithyouasyoumove
aroundthehouse,oryoucanscrewtheTouchScreen
intothedock.
• IfyouintendtousethedeviceONLYasa
tabletop,youcanuseeitheranEthernetora
WiFiconnection.
• IfyouintendtousetheTouchScreenasa
portabledeviceandremovetheTouchScreen
fromitsdock,youmustuseaWiFiconnection.

TousetheTouchScreenasaportabledevice,follow
theinstructionsnext.TousetheTouchScreenasa
tabletopdevice,usingthetwo(2)screwsindicatedin
“Requirements,”followtheinstructionsin“Usingthe
TouchScreenasaTabletopDevice.”
Using the Touch Screen as a Portabie Device
Usethe7”PortableTouchScreendockasthe
dockingstationfortheTouchScreen(seeFigure6).
NOTE:YoumustuseWiFiiftheTouchScreen
willbeusedasaportabledevice.
1 Placethe7”PortableTouchScreendockonaat
surface.
2 Power.Insertthepowercableintothepowerjack
slotonthebackofthedevice(seeFigure7),and
thenplugthepowercordintoawalloutlet.The
devicecanbepoweredusingeitheranEthernet
connectororaPoEconnector.TouseEthernet,
plugtheRJ-45connectorintothePoEconnector
andthenintotheEthernetjackonthebackof
theTouchScreendock(seeFigure6).
Ethernet, PoE Power Jack
Retaining Clip
Rubber Gasket
Touch Screen
Touch Screen Dock
3