User's Manual

™
8 Camera LED Indicator.Indicatesifthecamerais
on.Greenindicatesthecameraison.
9 Power LED Indicator.Indicatesifthepowerison.
10 Microphones.UsedtospeakintotheTouch
Screen.
Power and Network Connections
BeforeyoubegintoinstallyourTouchScreen,you’ll
needtomakeafewdecisions:
1 WillyoubeusingtheTouchScreenasaportable
device(docknotattached)orwiththedock
attached?See“PortableorTabletopInstallation
Options”fordetails.
2 WillyoubeusingtheDCPowerAdapter
(included)orPower-Over-Ethernet(sold
separately)?See“PortableorTabletop
InstallationOptions”fordetails.
LED Indicators
TheLEDsontheTouchScreenindicatethestatusof
thepowersupply,batterycharge,booting,etc.,as
describedinthenexttable.
LED Color Touch Screen Status
O -Notcharging
-Screensavermode,blank
-Screensavermode,charging
Red -O,charging
Green -On,notcharging
-Suspend/asleep,notcharging
Green(blinking) -Booting,notcharging
Green(fastblinks) -Restoring,notcharging
Orange -On,charging
-Suspend/asleep,charging
Orange(blinking) -Bootingwhilecharging
7”Portable
TouchScreen
SetupGuide
LED Color Touch Screen Status
Orange(fast
blinks)
-Restoringwhilecharging
NOTES:(1)IfthedeviceisOFF,pressPower.
Ifthedeviceisasleep,pressanybuttonor
tapthescreen.(2)TheTouchScreenmustbe
connectedtoapowersupplyforatleastfour
(4)hourssothebatterycanfullycharge.(3)
Ifthebatterypoweriscriticallylow,youcan
stillturnonthedeviceaslongasthedockis
pluggedintothepoweradapterorPoE.
Figure2.TopView
Figure3.BottomView
Figure4.RightView
Headphone Jack
Programmable
Buttons
(on right and left sides)
Speaker
Power/Charging LED
Reset/Restore
Pinhole
Microphones
Camera LED
Power Button
2