User's Manual

2 3
General description
General description
This Control4® Thermostat enables intelligent HVAC and Indoor Air Quality
control as part of a Control4 automated system. This thermostat uses the ZigBee®
(802.15.4) wireless networking standard to communicate with the Control4 system.
The Control4 Thermostat features a backlit LCD that displays the temperature,
HVAC status, Indoor Air Quality control status, fan status, hold status, and HVAC
operating mode. The home screen allows temperature setpoint adjustments,
HVAC mode change, various hold options, fan control, and access to the Indoor
Air Quality control screens. The Indoor Air Quality control screens can be used to
control ventilation, humidification, or dehumidification. The thermostat can operate
as a stand-alone control if it loses communication with the Control4 system.
Box contents
• Thermostat
• Wired outdoor temperature sensor
• 4 AA batteries
• 2 screws
• 2 wall anchors
• Warranty card
• Control4 Thermostat with
Humidity or Ventilation Control
Safety and Installation Instructions
(this document)
Supported systems
• One or two stage conventional
heat/cool system
• One or two stage heat pump with
up to two stages of auxiliary or
emergency heat
• Optional heat only or cool only
operation
• Configurable for electric or fossil
fuel heating
• Millivolt heat
• Hydronic heat
Box contents