Installation Guide

200-00394-C
2019-05-09 MS
Copyright ©2019, Control4 Corporation. All rights reserved. Control4, Pakedge, Triad, and their logos are registered trademarks or trademarks of Control4 Corporation
in the United States and/or other countries. 4Store, 4Sight, Control4 My Home, Mockupancy, and BakPak are also registered trademarks or trademarks of Control4
Corporation. Other names and brands may be claimed as the property of their respective owners. All specifications subject to change without notice.
C
Program SR-260 paging
You can program an action, such as a keypad button press, to
page the remote control (have the remote beep several times) if
it’s misplaced.
To program the remote’s paging feature:
1 In Composer Pro, select the Programming view.
2 Select the event that you want to use to start the page. For
example, to select a keypad button press, first select the
keypad in the project tree in the Events pane, then select the
button under Events.
The first part of the script is added to the Script pane.
3 In the project tree in the Actions pane (on the right), select
System Remote Control SR260.
4 In the Commands list, choose an action for the remote
control, then double-click the green arrow to add the action
to the Script pane.
Beep until button pressThe remote beeps until you
press one of its buttons.
Beep for X seconds (<254)The remote beeps until x
seconds have elapsed, or you press one of its buttons.
Stop BeepThe remote stops beeping.
Additional resources
The following resources are available for more support.
Control4 Knowledgebase and forums
Control4 Technical Support
Control4 website:
www.control4.com
Composer Pro User Guide or customer documentation on
the Control4 Portal
Regulatory/safety information
To review regulatory information for Control4 products,
see
ctrl4.co/reg
.
Warranty
Visit
www.control4.com/warranty
for details.
More help
For the latest version of this document and to view additional
materials, open the URL below or scan the QR code.
SR-260 DOCUMENTS
ctrl4.co/sr260