User's Manual

4
Mobile: (§2.1091) (b) —A mobile device is defined as a transmitting device designed to be used in other than fixed
locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally
maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. Per
§2.1091d(d)(4) In some cases (for example, modular or desktop transmitters), the potential conditions of use of a
device may not allow easy classification of that device as either Mobile or Portable. In these cases, applicants are
responsible for determining minimum distances for compliance for the intended use and installation of the device
based on evaluation of either specific absorption rate (SAR), field strength, or power density, whichever is most
appropriate.
Simultaneous transmission evaluation
This module has not been evaluated or approved for simultaneous transmission as it is impossible to determine
the exact multi-transmission scenario that a host manufacturer may choose. Any simultaneous transmission
condition established through module integration into
a host product must be evaluated per the requirements in KDB447498D01(8) and KDB616217D01,D03 (for laptop,
notebook, netbook, and tablet applications).
These requirements include, but are not limited to:
• Transmitters and modules certified for mobile or portable exposure conditions can be incorporated in
mobile host devices without further testing or certification when:
• The closest separation among all simultaneous transmitting antennas is >20 cm,
Or
• Antenna separation distance and MPE compliance requirements for ALL simultaneous transmitting
antennas have been specified in the application filing of at least one of the certified transmitters within
the host device. In addition, when transmitters certified for portable use are incorporated in a mobile
host device, the antenna(s) must be >5 cm from all other simultaneous transmitting antennas.
• All antennas in the final product must be at least 20 cm from users and nearby persons.
FCC statements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired
operation.
Cet appareil est conforme à la section 15 des réglementations de la FCC. Le fonctionnement de l’appareil est
sujetaux deux conditions suivantes :
1) cet appareil ne doit pas provoquer d’interférences néfastes, et
2) cet appareil doit tolérer les interférences reçues, y compris celles qui risquent de provoquer
unfonctionnement indésirable.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.